MAKE UP AIR UNIT | REPAIR AND INSTALLATION IN SURREY & ABBOTSFORD
Fill The Form Below And Have One Of Our Professionals Take Care Of The Problem
Knowledge HVAC & Refrigeration Make Up Air Unit Repair?
Knowledge HVAC & Refrigeration make up air installation and repair service should be done by a certified heating contractor in Surrey. Make up air units are devices that control and regulates the necessary intake of fresh into a building. It has a large air handler that uses 100% outside fresh air. This air is then distributed throughout a commercial space or building by the use of a blower fan motor through a single or multiple ducting within the building. Make up air unit are set up only when negative pressure caused by a forced-air heating system occurs. This is where the building is sealed and insulated properly, hence resulting in negative pressure developing inside. Rather than allowing this negative pressure to cause infiltration around doors, windows or wherever an unintended opening might be, contractors can do make up air unit installation in Abbotsford. This unit maintains output temperature between 55-75 degF.
Ensure optimal working conditions with automatic management of IAQ, consistent temperature, and controlled building pressure.
There are two common places where make up air unit installation for a building: directly on top of the roof or on the size of the building. These units would be installed on a ducting system in addition to supply fresh air to the building. Another side effect of negative pressure is where the building becomes starved for air, which negatively affects doors and windows, hence reducing building air quality. Since these systems bring in a constant supply of fresh air from the outside, ample air is available for building air quality which improves building efficiency. Current building codes and regulations required the use of makeup air units to prevent negative building pressure.
It is recommended by the manufacture that Surrey make up air unit install, repair and service of equipment be inspected once per year for safety and proper operation.
Failure to do so may result in Bad Air Quality, Equipment Failure, Carbon Monoxide Poisoning etc.
The Importance of Makeup Air Systems
Makeup air systems are crucial in reintroducing vented air, especially in buildings lacking such systems. Without proper ventilation, exhaust fans in bathrooms and kitchens can create a depressurized environment. This can result in air seepage through cracks or leaks, impacting air quality. Makeup air systems are essential to circulate fresh air, ensuring a safe and healthy indoor environment.
Why it Matters:
The absence of a makeup air system can compromise the air quality within a building, posing potential health risks. Proper circulation through an HVAC system is vital to maintaining a safe and comfortable environment for occupants.
Contact Us
Benefits of Makeup Air for Industrial Buildings
- Automated Control for Indoor Air Quality (IAQ), Temperature, and Building Pressure
Ensure optimal working conditions with automatic management of IAQ, consistent temperature, and controlled building pressure.
- Enhanced Worker Comfort and Productivity
Eliminate cold drafts, maintain consistent space temperature, and boost overall worker comfort and productivity.
- Reduced Heating and Ventilating Costs
Correct multiple building comfort issues, ensure compliance, and address mechanical HVAC and ventilation performance failures, ultimately reducing overall heating and ventilating expenses.
- Compliance with Outdoor Air/Fresh Air Codes
Fulfill regulatory requirements for outdoor air circulation and ensure a compliant environment.
- Cost-Efficient Direct-Fired Combustion
100% efficiency in direct-fired combustion, minimizing operating costs.
- Assistance to Existing Ventilation Systems
Augment existing ventilation systems and support the operation of dust collectors.
Contact the Right Team!
Contact Us
- Eliminating Negative Air Pressure
Prevent negative air pressure within the building, optimizing airflow and ventilation
- Improved Performance of Exhaust Systems
Enhance the efficiency of building exhaust systems, eliminating haze and indoor air pollutants.
- Prevention of Carbon Monoxide Risks
Rectify dangerous carbon monoxide and byproduct back-drafting issues from vent chimneys of other HVAC units in the building.
- Prevention of Untempered Air Infiltration and Drafts
Ensure controlled air infiltration, eliminating drafts and maintaining a comfortable indoor environment.
- Odour Control
Diffuse and eliminate unwanted process odours, creating a more pleasant working environment.
- Vancouver
- Lower Mainland
- Burnaby
- New Westminster
- Pitt Meadows
- Port Moody
- Coquitlam
- Surrey
- White Rock
- Langley
- Tsawwassen
- Aldergrove
- Abbotsford
- Mission
- Fraser Valley Area
- Chilliwack
Make An Appointment
Just fill out the following form, our expert team will contact and make sure you get the highest level of help.
